Instruction manual

In order to make a ball out of a snake, you need to put it in a straight straight line. It is necessary to collect only on one side. Take the snake so that the extreme triangle of the puzzle is in your left hand. Turn with your right hand the rest of the snake around this part. Each fragment is rotated only 1 time by 90 degrees. After each bend, proceed to the next part of the snake. Collect in order without missing triangles. In this case, always turn the tail, the part about which the twist remains stationary.

Start assembling the ball from the snake, the actions are: turn the part to the left, follow the same left, turn the third part to the right, fourth to the left, fifth to the right, sixth again to the right, seventh to the left, eighth to the right, ninth to the left, tenth again to the left, eleventh to the right, twelfth left, thirteenth right, fourteenth also right, fifteenth left, sixteenth right, seventeenth left, eighteenth left again, nineteenth right, twenty left, twenty first right, twenty second again right and last part to the left.

The snake ball is assembled. If you didn’t succeed, double-check what you were turning the puzzle pieces about. You need to twist starting each time from the next part.

There is a certain sequence, if you remember it, then it will be easier to collect. Turns in the same direction are repeated every 2 steps. At the same time, they alternate, if you start from the left, then the next will be right.

Everyone knows about the Rubik's Cube, and it has long been a good way to train mental activity, logic, and motor activity. Much less people know that there is a Rubik snake - no less fascinating and interesting puzzle that you can either buy in a store or make it yourself from a tree, getting a lot of pleasure from the different configurations and shapes that it can take. Unlike a cube, a Rubik's snake is a simpler puzzle, and therefore many children and adults like it.

Instruction manual

Insert a drill with a diameter of 1.5-2.5 mm into the drill and, having drawn a block into squares, drill a through hole in each square. The holes should be mutually perpendicular to each other.

To assemble the elements you need a strong elastic. If the cross-section of the bar was no more than 25 mm, you can simply stretch the rubber through the holes of the parts, placing the parts in a strip, alternating colors one at a time.

At the ends of the elastic, firmly tie the metal rings that will secure the structure. With larger modules of the snake, they can be connected with screws with rubber shock absorbers.

Rubik's Snake is a fascinating toy, a puzzle consisting of 24 prisms. These are isosceles figures, identical in shape and size, connected together on hinges. Thanks to the flexible connection, all parts rotate in different directions, while more than 200 various geometric and subject figures can be made from a long strip.

Along with the cube of the famous Hungarian inventor, the Rubik snake, although invented almost 40 years ago, is still popular. Like to rearrange prisms, creating new objects, not only children, but also their parents.

Who invented the puzzle

Erne Rubik is a world-famous inventor of puzzle toys. Its homeland, Hungary, is proud of its sculptor, architect, teacher and designer. In the 80s of the last century, he founded his own furniture design studio, helping talented inventors of the country realize their talent. In the 90s already founded his technical academy.

His inventions: a cube, a snake, a watch, magic rings and a ball are known to people all over the world. The surname of the great scientist, professor has become a household name. All children know the rubik's cube, but not all kids understand that this cube was invented by Professor Rubik from Hungary.

Snake composition

Outwardly, Rubik's snake looks like a long stick, consisting of 24 multi-colored parts. Now some manufacturers even produce copies of 36 elements. Each prism has a rectangular cross-section, which allows parts to tightly fit to each other during turns.

This toy has circular joints, but now there are a lot of fakes on sale in stores in which all the elements are connected using a fishing line. It’s better not to save, but to buy a high-quality puzzle, because the game involves frequent turns and movements of prisms around its axis.

The use of the puzzle

Rubik's snake is not only a fascinating, but also a useful toy. In a playful form, a child develops logical thinking, the ability to navigate in space, stimulates the imagination, the ability to fantasize. In the creation of new figures, the fine motor skills of the hands and fingers develop, which will be useful in further studies at school.

From the prisms that make up the Rubik snake, you can make both two-dimensional and three-dimensional compositions. Starting with the assembly of the simplest constructions - a broken line, a triangle or a rectangle - the child is fond of creating more complex figures.

You can take the puzzle invented by the talented inventor on the road, on a trip to the country house, or give the sick child to the hospital. She will lure the child and make him think about completing the assignment. The toy takes up a minimum of space, so the travel bag does not burden. You can use two puzzles and collect figures for speed, arranging a competition. Let's look at a couple of examples of what can be made from a snake.

Build a Rubik Snake

To create a heart from prisms, you need to collapse the square. Extra edges should be turned inward, connecting the figures first at a right angle to the sides. The following parts, on the one hand and on the other hand, need to be turned upside down so that they fit snugly against each other.

Turn the end two prisms with their sides in the middle so that the bases form a right angle.

Make a dog

If you do not know how to make a dog out of Rubik's snake, then carefully consider the photo below. Since the puzzle consists of different colors, you can easily guess which part you need to turn in which direction.

All connections are made inside the snake, and its edges serve as the pointed tips of the ears and tail of the animal. If your puzzle consists of 36 elements, do not worry, you can leave extra prisms in the center and make an elongated body of a dachshund.

This is the beauty of the toy. Even if something didn’t work out for you, you can dream up and come up with a name for this “creature,” and laugh at the same time.

Smart toy: Arina, instructions for assembling various figures from the Snake are in our plans! Smart toy: Dear customers, the figures presented in this article are the schemes for assembling the Snake. The toy folds into 50 different shapes. Among them there are simple ones, accessible for a preschooler and more complicated, for the assembly of which a certain training is needed. Smart toy: Enter the number or name of the figure in the "Your review about the article" field. The snake is designed for children from the age of 5 years. In my early childhood I had the same toy, then I was lost (or which of the younger relatives cut it) and was forgotten.

Usually I twist and twist the Snake when I watch TV shows. Thanks to your site, I hate the snake! Thanks for the schemes - otherwise I could not remember anything except a horse, a snake, a dog and a circle - to show my son (he was five - and collect the snake there too!) The snake turned out to be only 16 cm long, and the links turned very tight. Nobody not interested in such a toy.

What figures can be made of Snake - A clever toy. Smart toy: Yaroslav, and we would say that there are infinitely many figures made of snakes! The article presents only the most famous examples. I would like to add my photographs of figures from the Snake. 11. I have a snake for the third month. many figures that are published here I know and can do. I have known the snake for a long time, but I knew few figures. Using your site, I fixed it). We believe that every child on the planet should have a snake.

Smart toy: Svetlana, good luck in your further work from the snake! Smart toy: Andrey, thanks! Smart toy: Polina, hello! Smart toy: Alexander, thanks for the idea! So let's call it!

The snake is designed for children from the age of 5 years. It consists of 24 triangles of the same size. The Rubka snake consists of 24 consecutively connected to each other by a special spring mechanism of prisms with a section of a rectangle. The Rubik's snake consists of 24 identical isosceles triangular prisms, connected in series by the middle of the side faces.

2x2x2 cube assembly diagram. video how to assemble a Rubik snake! Following the cube, Rubik created the equally popular snake and the game Magic Rings. And here are 39 collected models from the Rubik snake, but all are very small. This allows you to create hundreds of figures from a Rubik snake. Rubik's snake is one of the most popular puzzles of our time, created by the Hungarian inventor and sculptor erne. Today we will make a ball from a Rubik snake!

Unlike a cube, the Rubik snake puzzle allows you to create a new figure each time. Few people know, but there are already more than a hundred of them. And constantly there are new schemes of what figures from a snake can really be created.

The standard puzzle has 24 pieces. But there are longer options, for example, with 36 or 48 parts.

The models that are created from it are divided into two-dimensional and three-dimensional. Some of them are quite simple, especially from the first group. Even younger students will cope with it. But there are figures over which even a person with experience in assembling it will break his head.

Interestingly, in a general sense it cannot be called a puzzle. Because she, rather, is a designer who needs to be assembled according to a previously thought-out plan. Or come up with something special. And then teach others about it.

This Rubik puzzle helps develop spatial imagination and creativity. It will prove to be an indisputable assistant in the formation of logic in the one who collects it.

How to read figure assembly diagrams?

First you need to properly position the snake. Its initial position is as follows: all parts form a straight line. If you look at it from the side, the dark triangles appear from below. Accordingly, light - on top.

All dark triangles are numbered from 1 to 12. From left to right, of course. These dark parts during the assembly of the figure from the snake remain motionless. Light details will rotate. With this figure, the next paragraph of the instruction for assembling a figure from a snake will begin.

If you need a rotation of the triangle that is on the left, then the letter “L” will be in the instructions. The right part rotates if the letter “P” is present.

The number of turns is limited to 3. Since the fourth will return the part to its original position. The number of turns is after the letter indicating the left or right side. The movement is clockwise.

Thus, each part of the assembly instructions for the figure from the Rubik snake is formed of three components:

• triangle number (1-12);
• side of rotation (L or P);
• number of turns (1-3).

For example, 10L1. She says that you need to rotate the light triangle to the left of 10 dark once.

Remembering this rule, it is easy to assemble any figure. And even write your own algorithm if you come up with something special. And it will be clear to everyone. In order for the assembly technology to be understandable to foreigners, it is customary to replace the Russian letters L and P with the Latin L and R.

A figure called "Onion"

This game is a snake puzzle. Figures sometimes have a name, which is not entirely clear where it came from. So with this one. To many, it rather resembles a flower. The assembly algorithm consists of the following actions:

1P3; 2L1; 2P3; 3L3; 4P1; 4L3; 3P3; 5L3; 5P3; 6L1; 6P3; 9L3; 8P1; 8L3; 7P3; 7L3; 9P3; 10L1; 12P1; 12L3; 11P3; 11L3; 10P3.

Explanation of instructions:

• the right one turns 3 times from the first;
• left from the 2nd - 1 time;
• from her right - 3;
• right from the 3rd - 3 times;
• 1 turn right from the 4th;
• from her left - 3;
• return to the third and turn right by 3;
• about the fifth, first left by 3, and then right also by 3;
• from the sixth they rotate - left by 1, right by 3;
• turn around the ninth left triangle 3 times;
• about the eighth right 1 time, and the left makes 3 turns;
• from the seventh symmetrically to the left and right by 3;
• the tenth on the left has one turn;
• near the twelfth one rotates right 1 time and left 3;
• from the eleventh there is again symmetry on the left and right in 3 turns;
• the right side of the 10th makes 3 turns.

Instructions for the figure "Giraffe"

Another three-dimensional model. This time an animal. Like the previous figure, it can be evaluated from all angles. Algorithm for assembling the model:

2P1; 3L3; 3P1; 4P3; 5L3; 4L2; 6L3; 6P3; 8P1; 8L3; 7P1; 7L2; 12P2.

How to make a compact triangle out of a snake?

It was the turn of the figures that indicate inanimate objects. One example is a volumetric triangular prism. Such an instruction is useful for its creation:

1P3; 3L2; 4P3; 3P2; 5P1; 5L2; 6P3; 7L2; 7P3; 6L2; 8P1; 8L2; 9P3; 11L2; 12P1; 9L2.

How to make a ball?

This is the most famous figure from this puzzle. The algorithm for its creation is as follows:

1P1; 2L3; 2P3; 3L1; 3P1; 4L1; 4P1; 5L3; 5P3; 12P3; 12L3; 11P3; 11L3; 10P1; 10L1; 9P1; 9L1; 8P3; 8L3; 7P1; 6P3; 6L3; 7L1.

One of many harness options

There are a lot of all kinds of weaving. This example strongly resembles a thick pigtail. In order to weave it, you need to perform the following sequence of turns:

1P3; 2L1; 2P3; 3L1; 3P3; 4L1; 4P3; 5L1; 5P3; 6L1; 7L1; 7P1; 8L3; 8P1; 9L3; 9P1; 10L3; 10P1; 11L3; 11P1; 12L3; 12P3; 6P1.

Figurine "Duck"

Most of the items that can be made from the puzzle are animals and birds or vehicles. This is an example of a snake figure that resembles a duck. Her algorithm:

1P2; 3P1; 4P1; 6L1; 8P1; 7L3; 6P2; 9P3; 9L2; 11L3; 12L3.

How to assemble an ostrich figure?

Another bird to create which you need a snake (figures). Instructions for its assembly:

1P2; 3L1; 2P2; 3P3; 4L1; 4P1; 5L1; 6L3; 5P1; 6P3; 7L3; 8L1; 7P3; 8P1; 9L2; 10L2; 12P2.

It can even be put and viewed from all sides. Real three-dimensional model.

Model for romantics "Heart"

Allows you to express your feelings without words. Why not Valentine on AND the algorithm is quite simple, at least short:

7L2; 9P1; 4P3; 3P3; 10P1; 12L2; 2L2.

In conclusion

After creating several figures according to a pre-thought out algorithm, you will definitely want to create something of your own. Perhaps it was once invented by someone. But for the one who thought of it himself, the model will be a real discovery. And what could be a great incentive for development?

I touched on the topic of how to “tear” children and adults from modern gadgets that have become part of our lives. Today I offer a ready-made solution, how to do it at least for a while

“Those born in the USSR” will surely smile, remembering such “native” puzzles as the Rubik's Cube and the Rubik Snake. Well, who at least once in his life did not hold a multi-colored Rubik's Cube in his hands? Or maybe among you there are masters of assembling a magic cube?

And who is Rubik, whose name is one of the most popular puzzles in the world?

By the way, Rubik's Cube is the world leader in total sales. Over the world during its existence more than 350 million copies have been sold!

About puzzle maker Ernн Rubik

But back to the creator. Ernö Rubik - Hungarian inventor, sculptor and architect, was born in Budapest during the Second World War on July 13, 1944. During his student years, Ernø received the specialty of civil engineer. After he taught at the Budapest Academy of Applied Arts and Crafts, and it was there, at the age of 30, trying to more clearly and easily explain to students the model of the foundations of mathematical groups, Ernё Rubik invented his famous Magic Cube, as it was originally called. The creator himself took more than a month to create it and search for solution algorithms. That is, the beloved by millions of toys was created as a study guide.

Did you know that the Rubik's Cube has 43 252 003 274 489 856 000 possible combinations, and only 1 right decision!

In the 80s, the Rubik's Cube conquered the Soviet Union and became the most popular puzzle toy. In those same years, Ernё Rubik himself became the editor of the magazine of games and puzzles. And in 1983, the genius inventor founded his own Rubik Studio, which to this day has been developing various kinds of educational games.

By the way, did you know that Erno Rubik was the first millionaire in Eastern Europe! And in the late 80s, he founded the “International Rubik Foundation”, which supported and supports young inventors.

Today, the creator of such well-known puzzles as Snake, Cube, Ball and Rubik's Rings, Ernн Rubik lives in a suburb of Budapest and is already developing electronic puzzles and video games.

Although I started my article with the Magic Cube, I would like to talk about his other famous invention - the Snake puzzle.

Puzzle "Rubik Snake"

Puzzle Rubik Snake - is a line consisting of 24 isosceles prisms connected together. Prisms are interconnected by hinges and allow you to collect more than 100 two-and three-dimensional models: geometric shapes, animals and other associative models.

In our family, another invasion of hobby for this puzzle occurred before the New Year. One day, children had their own snakes. (By the way, of all the surprises of Advent, these are the most beloved and most desired. Children return to them every day). And now and then I had to collect the ball, which so far is difficult for children.

The puzzle toy Rubik Snake develops spatial and logical thinking, fantasy, imagination. And how she decorates family evenings! .. when someone alone, carried away by the assembly, asks to guess what or whom he collected, then after 10 minutes, the snakes start running around, and you have to stand in line to play

What we love to collect:

• Ball
• Actually a snake
• Geometric figures
• The numbers
• Dogs, birds and cats of different sizes
• Pigtails, etc.
• But boys, there are boys, and they have already counted several types of weapons collected from Rubik Snake.)))

But, after all, the main thing is that they are collected !!! Games with the Snake puzzle give a wide scope to the imagination, develop logical thinking, stimulate creativity, and also incredibly improve spatial thinking.

Want to see what and how we can collect? In this video, I have shown so far only 7 figures, but the most favorite. And this is just the beginning!